ACT AK4082 DisplayPort kabel 2 m crni

The ACT AK4082 DisplayPort cable is a DisplayPort 2.1 DP80 UHBR20 cable designed for high-bandwidth video and audio transmission. With a 2 m length and lockable snap-in DisplayPort connectors on both ends, the cable supports resolutions up to 10K@30Hz, 8K@60Hz and 4K@240Hz and a maximum bandwidth of 80 Gbps. It is suitable for demanding professional and consumer setups that require reliable, high-resolution display connectivity.

Advantages

The cable provides UHBR20 DP80 performance with 80 Gbps bandwidth and support for Display Stream Compression (DSC 1.2a), HDR, HDCP 2.2 and multi-channel audio formats. Full copper conductors and gold-plated contacts ensure stable signal transmission, while the snap-in locking connector reduces the risk of accidental disconnection. The 2 m length offers flexible placement between source and display.

Suitable for

When it may not be suitable

This cable may be unnecessary for basic office displays or legacy systems that do not support DisplayPort 2.1 bandwidth or advanced features such as DSC or HDR. If your devices only require standard Full HD or lower resolutions, a lower-specification cable will provide comparable performance at lower cost.

Key specifications

How to use

Connect one DisplayPort male connector to the source device (PC, GPU, media player) and the other to the DisplayPort input of the monitor, projector or AV receiver. Ensure both devices support the desired resolution and refresh rate; enable DSC or HDR in device settings if required. The snap-in latch secures the connection; press the latch release tab to unplug the cable.

What to consider before purchase

Recommendations

For best results, use the ACT AK4082 with DisplayPort 2.1-capable graphics cards and monitors and keep firmware/drivers up to date. When targeting the highest refresh rates or resolutions, verify display and GPU settings and enable DSC or HDR as supported.