Pročistač zraka Prime3 SAP81

Air Purifier Prime3 SAP81 is a household air cleaner designed for rooms up to 50 m2. The device combines a multi-stage filtration system with ionization and UV sterilization to reduce suspended PM2.5 particles, bacteria, viruses and volatile organic compounds. With a rated power of 80 W and CADR performance up to 350 m3/h, the purifier provides continuous purification while operating quietly.

Advantages

The SAP81 features a 7-stage purification process including mechanical pre-filter, cold catalysis, activated carbon, antibacterial and HEPA filtration, supported by an ionizer and a UV lamp. This configuration removes up to 99.95% of PM2.5 particles, up to 99.99% of bacteria and viruses and up to 99% of formaldehyde and similar volatile organic compounds. The unit includes an air quality indicator, Smart mode that adapts fan speed automatically, a timer, child lock and a remote control for convenient operation.

Suitable for

• Homes and apartments up to 50 m2
• Offices and workspaces where reduced particulate and microbial load is required
• Rooms affected by smog, cooking or chimney odors

Key specifications

• 7-stage purification: pre-filter, cold catalysis, activated carbon, antibacterial, HEPA, ionizer, UV lamp
• PM2.5 removal efficiency up to 99.95%
• Bacteria and virus removal efficiency up to 99.99%
• Formaldehyde and VOC removal up to 99%
• Ionization efficiency: up to 20 × 10^6 ions/s
• Recommended area: up to 50 m2
• CADR / airflow up to 350 m3/h
• Operating modes: 3 speeds + Smart mode
• Noise level: 29–50 dB (model data: 25–50 dB reported)
• Timer: 0.5–12 hours
• Child lock and air quality indicator (PM2.5 in µg/m3)
• Rated power: 80 W; Power supply: 220–240 V ~ 50/60 Hz
• Dimensions: 37 × 19.5 × 65 cm; Weight: 8 kg
• Remote control included (batteries supplied)

How to use

Place the Prime3 SAP81 on a flat surface in the center of the room or where airflow is unobstructed. Connect to a standard 220–240 V outlet and power on using the touch control panel or remote. Use Smart mode for automatic adjustment of fan speed based on detected PM2.5 concentration. For manual control select one of the three fan speeds. Set the timer if you want the unit to switch off automatically between 30 minutes and 12 hours. Activate child lock to prevent accidental changes to settings.

Recommendations

For best results, keep doors and windows closed during operation in polluted conditions, replace filters according to the manufacturer’s schedule, and position the purifier away from large furniture that could block airflow. Regularly clean the pre-filter and follow safety instructions when handling the UV lamp and antibacterial filter.